用于蓝光(405nm)激光直写的聚乙烯醇/银纳米复合材料薄膜的制备

利用紫外光诱导还原金属前躯体硝酸银(AgNO3),直接在聚乙烯醇(PVA)薄膜中生长银纳米颗粒,成功制备出PVA/Ag纳米复合材料薄膜。利用紫外-可见吸收光谱分析了银离子浓度、紫外光辐照功率和辐照时间对薄膜光谱的影响趋势。通过优化硝酸银浓度、辐照条件来调节薄膜中银纳米颗粒的尺寸和空间分布密度,成功地将此复合薄膜的等离子共振吸收峰位调节为406nm,并用于蓝光(405nm)激光直写光刻。扫描电子显微镜(SEM)观察表明,该材料中纳米颗粒分布均匀,粒径分布较窄;X射线光电子谱(XPS)证实了合成的纳米颗粒为单质银;原子力显微镜(AFM)分析显示薄膜光刻后获得了表面清晰、光滑、规整的图形。     

Spin-parity analysis of pp¯ mass threshold structure in J/ψ and ψ(3686) radiative decays

A partial wave analysis of the ppˉ mass-threshold enhancement in the reaction J/ψ→γppˉ is used to determine its J(PC) quantum numbers to be 0(-+), its peak mass to be below threshold at M=1832(-5)(+19)(stat)(-17)(+18)(syst)±19(model) MeV/c(2), and its total width to be Γ<76 MeV/c(2) at the 90% C.L. The product of branching ratios is measured to be BR[J/ψ→γX(ppˉ)]BR[X(ppˉ)→ppˉ]=[9.0(-1.1)(+0.4)(stat)(-5.0)(+1.5)(syst)±2.3(model)]×10(-5). A similar analysis performed on ψ(3686)→γppˉ decays shows, for the first time, the presence of a corresponding enhancement with a production rate relative to that for J/ψ decays of R=[5.08(-0.45)(+0.71)(stat)(-3.58)(+0.67)(syst)±0.12(model)]%.     

First observation of η(1405) decays into f(0)(980)π0

The decays J/ψ → γ π+ π- π0 and J/ψ → γ π0 π0 π0 are analyzed using a sample of 225×10(6) J/ψ events collected with the BESIII detector. The decay of η(1405) → f(0)(980)π0 with a large isospin violation is observed for the first time. The width of the f(0)(980) observed in the dipion mass spectra is anomalously narrower than the world average. Decay rates for three-pion decays of the η' are also measured precisely.     

Compact and widely tunable terahertz source based on a dual-wavelength intracavity optical parametric oscillation

In this paper, a continuously tunable terahertz (THz) source is obtained using a compact intracavity pumped dual-wavelength optical parametric oscillation operating around 2.1 μm as difference-frequency generation pump source. The tuning range of the THz-wave frequency covers from 0.147 THz to 3.651 THz. Based on the collinear difference-frequency generation in the GaSe crystal, the experiment result shows that our schematic is a good option to construct a compact and portable terahertz source with widely tunable range.     

Density–temperature properties of Ga–Sb alloy melt

In an experiment, the improved Archimedes method was used to test and analyze density–temperature properties of Ga, Sb and Ga–Sb melts. The experimental results indicated that the density of Ga₇Sb₉₃ melt shows a linear trend of decline when its temperature changes within the experimental range, whereas the densities of Ga_36.5Sb_63.5 and Ga₃₀Sb₇₀ melts show a non-continuous change near the melting point, which rises first and then drops abnormally. These results were analyzed from the perspective of a liquid–liquid structure transition according to the property changes of Ga–Sb melt.     

Effects of the transducer dynamics in underwater acoustic communication

The inter-carrier interference (ICI) of Orthogonal Frequency Division Multiplexing (OFDM) symbols, which is caused by the transducer’s dynamics, has been analysed and simulated in this paper. The small Cyclic Prefix (CP) method is proposed to overcome the ICI caused by the transducer in order to maintain the orthogonality between sub-carriers without much loss of the energy and the bandwidth efficiency. The simulation results show that the small CP whose length is longer than the transient response of the transducer can eliminate the ICI problem.     

内掺氮富勒烯N_2@C_(60)的几何结构和电子性质的密度泛函计算研究

采用密度泛函理论中的广义梯度近似对内掺氮富勒烯N2@C60的几何结构和电子性质进行计算研究.发现在N2@C60中,氮倾向以分子形式存在于C60中心处.键长分析、能级图、态密度图和电荷分析表明内掺氮分子对C60几何结构和电子结构带来的影响甚微.     

目标激光脉冲一维距离成像研究

根据激光雷达方程及粗糙面脉冲波束散射理论,提出了目标激光脉冲后向散射回波功率即激光一维距离像的计算表达式,并获得斜板、球和圆锥一维距离像的具体形式.数值计算结果与粗糙平板和圆锥激光脉冲回波强度实验数据比较,两者符合良好.数据分析表明,激光一维距离像曲线能够较好反映目标的纵向几何外形信息.我们着重讨论了入射激光脉冲宽度与目标径向尺寸对距离像的影响.上述研究可为激光波段的目标特征提取和识别提供理论依据.     

a-Si:H/c-Si 异质结太阳电池 J-V 曲线的 S-Shape 现象

通过异质结界面分析与 AMPS 模拟计算研究了 a-Si:H/c-Si 异质结太阳电池在低温工作、a-Si:H 层低掺杂、高价带补偿以及高界面态时光态 J-V 曲线出现 S-Shape 现象的物理过程,总结了 S-Shape 现象的物理原因.分析结果表明,当空穴输运受到界面势垒的限制时,空穴在 c-Si 界面附近聚集,能带重新分配,c-Si 耗尽区的电场减小,更多的电子从 c-Si 准中性区反转至 c-Si 界面及耗尽区与空穴复合,复合速率显著增大,光电流的损失显著增大,光态 J-V< 关键词： 模拟 异质结太阳电池 a-Si:H/c-Si 异质结     

TiN对Co基合金激光熔覆层组织与性能的影响

采用5 kW CO2激光器在低碳钢表面熔覆Co基合金涂层及TiN/Co基合金复合涂层,研究了两种涂层的组织、显微硬度以及滑动磨损性能。结果表明,Co基合金涂层主要组成相为-γCo,-εCo,Cr23C6等,TiN/Co基合金复合涂层组成相为-γCo,-εCo,Cr23C6,TiN和TiC等。Co基合金涂层由发达的-γCo枝晶和其间共晶组织所组成,TiN/Co基合金涂层典型组织为等轴固溶体以及细小的共晶组织。TiN对熔覆层的组织有显著的改善作用,促使其组织细化,树枝晶向等轴晶转化,同时可显著提高Co基合金涂层的显微硬度及耐磨性能。